Our Profile
Rudra International - Profile
33KV Current Transformer
Imported from India
Manufacturer: MACROPLAST PVT. LTD.
Contractor/Distributor:
Supplied To: Transmission Grid, Western Division
Technical Specification
Technical Specifications for 33 KV Current Transformer (Live Tank)
|
||
S.N. |
Name |
Spec. |
1 |
Type
|
33 KV, Outdoor, Oil Immersed, Live Tank Current Transformer having CTR:600-400-200/1-1 Amp |
2 |
Accuracy Class |
0.5 of Core-I / 5P20 of Core-II |
3 |
Burden |
15 VA / 15 VA |
Turbine Element(Needle Seed)
Imported from India
Manufacturer:
Contractor/Distributor:
Supplied To: Ilam Hydropower Station
Data Cable (Shielded)
Imported from China
Manufacturer: JIANGSU HUAMING CABLE CO.,LTD
Contractor/Distributor:
Supplied To: Trishuli Hydropower Station
Technical Specification
Technical Specifications for the Data Cable
|
||
S.N. |
Name |
Specification |
1 |
Style
|
NONUL |
2 |
Size |
0.75mm2 BS/4C+A |
3 | Conductor | |
3a | Material | Stranded Bare Copper Wire |
3b | Size | 0.75mm2/4C |
3c | Construction (mm) | 24 |
0.20±0.008 | ||
3d | Diameter (mm) | 1.13 |
4 | Insulator | |
4a | Material | PVC |
4b | Diameter (mm) | 1.80±0.10 |
4c | Color | 1 Black, 2 Red, 3 White, 4 Green |
5 | Jacket | |
5a | Material | PVC |
5b | Finished diameter | (6.0±0.20)mm |
5c | Color | Black(half matte) |
6 | Physical Properties (Insulation/Jacket) | |
6a | Elongation | >100% |
6b | Strength | >10.3MPa |
7 | Conductor Resistance | =24.7 (?/Km, 20?) |
Float cum Boost Battery Charger
Imported from India
Manufacturer: Baid Power Services Pvt. Ltd
Contractor/Distributor:
Supplied To: Panauti Hydropower Station
Technical Specification
Technical Specifications for Float cum Boost Battery Charger
|
||
S.N. |
Name |
Specification |
1 |
Type
|
Microprocessor Control, Float cum Boost charger |
2 |
Applicable Standard |
IEC 60623 or IP 31 |
3 |
AC Input |
3 Phase, 415VAC ±10% |
4 |
AC Input Frequency |
50Hz ± 6% |
5 |
DC Output |
Voltage 110 V Nominal; Current 200A |
6 |
Float Charge |
Adjustable 75% to 125% |
7 |
High Rate Charge |
Adjustable 75% to 135% |
8 |
Current Limit |
Adjustable 0% to 100% |
9 |
Voltage Regulation |
Static ±1% Dynamic ±5% Recovary 70 ms to 250ms |
10 |
Current Regulation |
±1% at current limit |
11 |
Charge Characteristics |
Constant Current/Constant Voltage IU as per IEC 478-1 |
12 |
Dielectric Strength |
2000VAC/1 minute input/output to ground |
13 |
Insulation Resistance |
10 Mohm 500 VDC input/output to ground |
14 |
Ripple Voltage |
Charging Rating 2.5% rms Typical 5% rms Max Battery Disconnected |
15 |
Protection |
AC and Dc Voltage Surge Suppression Slow Start Function Short Circuit Proof Current Limit at 100% Inom Internal DC Fuses AC Input MCB DC Output Fuse |
16 |
Basic System Specification and Configuration |
System Configuration Consists of Basic Microprocessor Rectifier MCB-AC Input MCB-DC Output Battery Fuses |
17 |
Display LCD |
Bright 2 line Dot Matrix 16 character display with back light system parameters :- Measured and Calculated Charging Mode – Status and elapsed time Alarm Massages Massage while settling alarm or system parameters |
18 |
Metering LCD |
AC Main Voltage Rectifier DC Output Voltage Rectifier DC Output Current Load DC Voltage Load DC Current Battery Current |
19 |
Accuracy LCD |
Voltage 1.5% Current 1.5% |
20 | Status Indicators Panel | Two bright LED's on the front below LCD screen Red LED Fault Green LED System OK |
21 | Display Control Panel | Three Menu Driven Membrane Switches/Keys below LCD screen |
22 | System Control | Rectifier on/off by MCB located inside the rectifier Constant Voltage Charging with user selectable limit for Float and High rate Adjustable Current Limit Setting Alarm Reset – Local Manual Voltage and Current Adjustment Auto/Manual High Rate Charge Auto Switching to High Rate Charge Auto Switching to High Rate after battery discharge Auto Switching back to Float battery is fully charged at High Rate High Rate Charge can be activated manually at any time. |
23 | Temperature | Operational 0 to +40 Deg C 40 to 55 Deg C Derate output current by 1.25% per Deg C above 40 |
24 | Acoustic Noise | 45-65 dBA |
25 | Cable Entry | Bottom |
26 | Ventilation | Forced Fan Cooling |
27 | Access | Front |
28 | Color | RAL 7035 Light Grey |
29 | Door/Side Panels | 1.5mm sheet steel epoxy powder spray coated |
Quick Links
The Company
Our Services
Contact Us
For further inquiries, please contact us at info@rudra.com.np or use our online contact form.
Send us your inquiry